Spherical roller bearings
24992X2CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
24992X2CAF3/W33 spherical roller bearing: 460 mm bore (d), 620 mm outside diameter (D), 140 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 460 mm |
|---|---|
| Outside diameter D | 620 mm |
| Width B | 140 mm |
| Mass | 122 kg |
| Catalogue dynamic load Cr | 2440 kN |
| Catalogue static load Cor | 6000 kN |
| Grease-lubricated speed grease | 420 rpm |
| Oil-lubricated speed oil | 520 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 602 mm |
|---|---|
| Abutment dimension da da | 478 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 3.15 |
| Factor Y1 Y1 | 3.22 |
| Factor Y2 Y2 | 4.8 |
| Factor e e | 0.21 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24992X2CAF3/W33?
The 24992X2CAF3/W33 catalogue lists da = 478 mm; Da = 602 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24992X2CAF3/W33?
The listed values for 24992X2CAF3/W33 are grease: 420 rpm; oil: 520 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24992X2CAF3/W33?
The catalogue reference mass for 24992X2CAF3/W33 is 122 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.