Metric single-row tapered roller bearings
32034X Tapered Roller Bearing Dimensions & Specifications
32034X tapered roller bearing: 170 mm bore (d), 260 mm outside diameter (D), 57 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 170 mm |
|---|---|
| Outside diameter D | 260 mm |
| Overall width T | 57 mm |
| Inner-ring width B | 57 mm |
| Outer-ring width C | 43 mm |
| Mass | 10.6 kg |
| Catalogue dynamic load Cr | 505 kN |
| Catalogue static load Cor | 890 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 239 mm |
|---|---|
| Abutment dimension Db Db | 253 mm |
| Abutment dimension da da | 196 mm |
| Abutment dimension db db | 180 mm |
| Minimum chamfer r12 r12 | 3 mm |
| Minimum chamfer r34 r34 | 2.5 mm |
| Factor Y Y | 1.4 |
| Factor Y0 Y0 | 0.74 |
| Factor e e | 0.44 |
| Maximum fillet ra ra | 2.5 mm |
| Maximum fillet rb rb | 2 mm |
| Load centre dimension a a | 56.6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 32034X?
For 32034X, the complete bearing width T is 57 mm; the inner-ring width B is 57 mm. The outer-ring width C is 43 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 32034X?
The 32034X catalogue lists da = 196 mm; Da = 239 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 32034X?
The catalogue reference mass for 32034X is 10.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.