Metric single-row tapered roller bearings
32036X Tapered Roller Bearing Dimensions & Specifications
32036X tapered roller bearing: 180 mm bore (d), 280 mm outside diameter (D), 64 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 180 mm |
|---|---|
| Outside diameter D | 280 mm |
| Overall width T | 64 mm |
| Inner-ring width B | 64 mm |
| Outer-ring width C | 48 mm |
| Mass | 14.3 kg |
| Catalogue dynamic load Cr | 640 kN |
| Catalogue static load Cor | 1130 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 257 mm |
|---|---|
| Abutment dimension Db Db | 272 mm |
| Abutment dimension da da | 208 mm |
| Abutment dimension db db | 192 mm |
| Minimum chamfer r12 r12 | 3 mm |
| Minimum chamfer r34 r34 | 2.5 mm |
| Factor Y Y | 1.4 |
| Factor Y0 Y0 | 0.78 |
| Factor e e | 0.42 |
| Maximum fillet ra ra | 2.5 mm |
| Maximum fillet rb rb | 2 mm |
| Load centre dimension a a | 60.4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 32036X?
For 32036X, the complete bearing width T is 64 mm; the inner-ring width B is 64 mm. The outer-ring width C is 48 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 32036X?
The 32036X catalogue lists da = 208 mm; Da = 257 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 32036X?
The catalogue reference mass for 32036X is 14.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.