Deep groove ball bearings
6020M Deep Groove Ball Bearing Dimensions & Specifications
6020M deep groove ball bearing: 100 mm bore (d), 150 mm outside diameter (D), 24 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 100 mm |
|---|---|
| Outside diameter D | 150 mm |
| Width B | 24 mm |
| Mass | 1.40 kg |
| Catalogue dynamic load Cr | 60 kN |
| Catalogue static load Cor | 54 kN |
| Grease-lubricated speed grease | 4500 rpm |
| Oil-lubricated speed oil | 5300 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 142 mm |
|---|---|
| Abutment dimension da da | 108 mm |
| Minimum chamfer r12 r12 | 1.5 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 1.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6020M?
The 6020M catalogue lists da = 108 mm; Da = 142 mm; ra ≤ 1.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6020M?
The listed values for 6020M are grease: 4500 rpm; oil: 5300 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6020M?
The catalogue reference mass for 6020M is 1.40 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.