Deep groove ball bearings
6022 Deep Groove Ball Bearing Dimensions & Specifications
6022 deep groove ball bearing: 110 mm bore (d), 170 mm outside diameter (D), 28 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 110 mm |
|---|---|
| Outside diameter D | 170 mm |
| Width B | 28 mm |
| Mass | 2.09 kg |
| Catalogue dynamic load Cr | 82 kN |
| Catalogue static load Cor | 73 kN |
| Grease-lubricated speed grease | 3800 rpm |
| Oil-lubricated speed oil | 4500 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 161 mm |
|---|---|
| Abutment dimension da da | 119 mm |
| Minimum chamfer r12 r12 | 2.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6022?
The 6022 catalogue lists da = 119 mm; Da = 161 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6022?
The listed values for 6022 are grease: 3800 rpm; oil: 4500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6022?
The catalogue reference mass for 6022 is 2.09 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.