Deep groove ball bearings
6030X1M Deep Groove Ball Bearing Dimensions & Specifications
6030X1M deep groove ball bearing: 150 mm bore (d), 224.5 mm outside diameter (D), 35 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 150 mm |
|---|---|
| Outside diameter D | 224.5 mm |
| Width B | 35 mm |
| Mass | 4.98 kg |
| Catalogue dynamic load Cr | 128 kN |
| Catalogue static load Cor | 126 kN |
| Grease-lubricated speed grease | 2600 rpm |
| Oil-lubricated speed oil | 3200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 214 mm |
|---|---|
| Abutment dimension da da | 161 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6030X1M?
The 6030X1M catalogue lists da = 161 mm; Da = 214 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6030X1M?
The listed values for 6030X1M are grease: 2600 rpm; oil: 3200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6030X1M?
The catalogue reference mass for 6030X1M is 4.98 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.