Deep groove ball bearings
6032 Deep Groove Ball Bearing Dimensions & Specifications
6032 deep groove ball bearing: 160 mm bore (d), 240 mm outside diameter (D), 38 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 160 mm |
|---|---|
| Outside diameter D | 240 mm |
| Width B | 38 mm |
| Mass | 5.63 kg |
| Catalogue dynamic load Cr | 136 kN |
| Catalogue static load Cor | 135 kN |
| Grease-lubricated speed grease | 2400 rpm |
| Oil-lubricated speed oil | 3000 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 229 mm |
|---|---|
| Abutment dimension da da | 171 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6032?
The 6032 catalogue lists da = 171 mm; Da = 229 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6032?
The listed values for 6032 are grease: 2400 rpm; oil: 3000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6032?
The catalogue reference mass for 6032 is 5.63 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.