Deep groove ball bearings
6060X2 Deep Groove Ball Bearing Dimensions & Specifications
6060X2 deep groove ball bearing: 300 mm bore (d), 460 mm outside diameter (D), 68 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 300 mm |
|---|---|
| Outside diameter D | 460 mm |
| Width B | 68 mm |
| Mass | 49.0 kg |
| Catalogue dynamic load Cr | 256 kN |
| Catalogue static load Cor | 474 kN |
| Grease-lubricated speed grease | 1200 rpm |
| Oil-lubricated speed oil | 1500 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 435 mm |
|---|---|
| Abutment dimension da da | 329 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6060X2?
The 6060X2 catalogue lists da = 329 mm; Da = 435 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6060X2?
The listed values for 6060X2 are grease: 1200 rpm; oil: 1500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6060X2?
The catalogue reference mass for 6060X2 is 49.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.