Deep groove ball bearings
16060 Deep Groove Ball Bearing Dimensions & Specifications
16060 deep groove ball bearing: 300 mm bore (d), 460 mm outside diameter (D), 50 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 300 mm |
|---|---|
| Outside diameter D | 460 mm |
| Width B | 50 mm |
| Mass | 32.0 kg |
| Catalogue dynamic load Cr | 285 kN |
| Catalogue static load Cor | 405 kN |
| Grease-lubricated speed grease | 1200 rpm |
| Oil-lubricated speed oil | 1500 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 435 mm |
|---|---|
| Abutment dimension da da | 329 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 16060?
The 16060 catalogue lists da = 329 mm; Da = 435 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 16060?
The listed values for 16060 are grease: 1200 rpm; oil: 1500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 16060?
The catalogue reference mass for 16060 is 32.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.