Deep groove ball bearings
619/530F1 Deep Groove Ball Bearing Dimensions & Specifications
619/530F1 deep groove ball bearing: 530 mm bore (d), 710 mm outside diameter (D), 82 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 530 mm |
|---|---|
| Outside diameter D | 710 mm |
| Width B | 82 mm |
| Mass | 89.8 kg |
| Catalogue dynamic load Cr | 455 kN |
| Catalogue static load Cor | 870 kN |
| Grease-lubricated speed grease | 700 rpm |
| Oil-lubricated speed oil | 850 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 676 mm |
|---|---|
| Abutment dimension da da | 572 mm |
| Minimum chamfer r12 r12 | 5.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/530F1?
The 619/530F1 catalogue lists da = 572 mm; Da = 676 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/530F1?
The listed values for 619/530F1 are grease: 700 rpm; oil: 850 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/530F1?
The catalogue reference mass for 619/530F1 is 89.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.