Deep groove ball bearings
619/560F1 Deep Groove Ball Bearing Dimensions & Specifications
619/560F1 deep groove ball bearing: 560 mm bore (d), 750 mm outside diameter (D), 85 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 560 mm |
|---|---|
| Outside diameter D | 750 mm |
| Width B | 85 mm |
| Mass | 105 kg |
| Catalogue dynamic load Cr | 525 kN |
| Catalogue static load Cor | 1040 kN |
| Grease-lubricated speed grease | 670 rpm |
| Oil-lubricated speed oil | 800 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 715 mm |
|---|---|
| Abutment dimension da da | 604 mm |
| Minimum chamfer r12 r12 | 5.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/560F1?
The 619/560F1 catalogue lists da = 604 mm; Da = 715 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/560F1?
The listed values for 619/560F1 are grease: 670 rpm; oil: 800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/560F1?
The catalogue reference mass for 619/560F1 is 105 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.