Deep groove ball bearings
61922 Deep Groove Ball Bearing Dimensions & Specifications
61922 deep groove ball bearing: 110 mm bore (d), 150 mm outside diameter (D), 20 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 110 mm |
|---|---|
| Outside diameter D | 150 mm |
| Width B | 20 mm |
| Mass | 0.90 kg |
| Catalogue dynamic load Cr | 43 kN |
| Catalogue static load Cor | 45 kN |
| Grease-lubricated speed grease | 4000 rpm |
| Oil-lubricated speed oil | 4800 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 144 mm |
|---|---|
| Abutment dimension da da | 117 mm |
| Minimum chamfer r12 r12 | 1.1 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 1 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 61922?
The 61922 catalogue lists da = 117 mm; Da = 144 mm; ra ≤ 1 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 61922?
The listed values for 61922 are grease: 4000 rpm; oil: 4800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 61922?
The catalogue reference mass for 61922 is 0.90 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.