Deep groove ball bearings
6234M Deep Groove Ball Bearing Dimensions & Specifications
6234M deep groove ball bearing: 170 mm bore (d), 310 mm outside diameter (D), 52 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 170 mm |
|---|---|
| Outside diameter D | 310 mm |
| Width B | 52 mm |
| Mass | 18.4 kg |
| Catalogue dynamic load Cr | 212 kN |
| Catalogue static load Cor | 224 kN |
| Grease-lubricated speed grease | 1900 rpm |
| Oil-lubricated speed oil | 2400 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 294 mm |
|---|---|
| Abutment dimension da da | 186 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 15 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6234M?
The 6234M catalogue lists da = 186 mm; Da = 294 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6234M?
The listed values for 6234M are grease: 1900 rpm; oil: 2400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6234M?
The catalogue reference mass for 6234M is 18.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.