Deep groove ball bearings
6236M Deep Groove Ball Bearing Dimensions & Specifications
6236M deep groove ball bearing: 180 mm bore (d), 320 mm outside diameter (D), 52 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 180 mm |
|---|---|
| Outside diameter D | 320 mm |
| Width B | 52 mm |
| Mass | 17.8 kg |
| Catalogue dynamic load Cr | 227 kN |
| Catalogue static load Cor | 241 kN |
| Grease-lubricated speed grease | 1800 rpm |
| Oil-lubricated speed oil | 2200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 297 mm |
|---|---|
| Abutment dimension da da | 204 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 15 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6236M?
The 6236M catalogue lists da = 204 mm; Da = 297 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6236M?
The listed values for 6236M are grease: 1800 rpm; oil: 2200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6236M?
The catalogue reference mass for 6236M is 17.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.