Deep groove ball bearings
62952X1M-2 Deep Groove Ball Bearing Dimensions & Specifications
62952X1M-2 deep groove ball bearing: 260 mm bore (d), 379.5 mm outside diameter (D), 60 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 260 mm |
|---|---|
| Outside diameter D | 379.5 mm |
| Width B | 60 mm |
| Mass | 22.0 kg |
| Catalogue dynamic load Cr | 253 kN |
| Catalogue static load Cor | 320 kN |
| Grease-lubricated speed grease | 1600 rpm |
| Oil-lubricated speed oil | 1900 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 356 mm |
|---|---|
| Abutment dimension da da | 288 mm |
| Minimum chamfer r12 r12 | 4.7 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 62952X1M-2?
The 62952X1M-2 catalogue lists da = 288 mm; Da = 356 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 62952X1M-2?
The listed values for 62952X1M-2 are grease: 1600 rpm; oil: 1900 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 62952X1M-2?
The catalogue reference mass for 62952X1M-2 is 22.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.