Deep groove ball bearings
62956X3M Deep Groove Ball Bearing Dimensions & Specifications
62956X3M deep groove ball bearing: 280 mm bore (d), 375 mm outside diameter (D), 65 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 280 mm |
|---|---|
| Outside diameter D | 375 mm |
| Width B | 65 mm |
| Mass | 16.2 kg |
| Catalogue dynamic load Cr | 187 kN |
| Catalogue static load Cor | 265 kN |
| Grease-lubricated speed grease | 1500 rpm |
| Oil-lubricated speed oil | 1800 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 357 mm |
|---|---|
| Abutment dimension da da | 302 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 62956X3M?
The 62956X3M catalogue lists da = 302 mm; Da = 357 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 62956X3M?
The listed values for 62956X3M are grease: 1500 rpm; oil: 1800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 62956X3M?
The catalogue reference mass for 62956X3M is 16.2 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.