Single-row cylindrical roller bearings
N30/600 Cylindrical Roller Bearing Dimensions & Specifications
N30/600 cylindrical roller bearing: 600 mm bore (d), 870 mm outside diameter (D), 200 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 600 mm |
|---|---|
| Outside diameter D | 870 mm |
| Width B | 200 mm |
| Mass | 415 kg |
| Catalogue dynamic load Cr | 4890 kN |
| Catalogue static load Cor | 9860 kN |
| Grease-lubricated speed grease | 500 rpm |
| Oil-lubricated speed oil | 600 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Db Db | 844 mm |
|---|---|
| Abutment dimension da da | 626 mm |
| Minimum chamfer r12 r12 | 6 mm |
| Minimum chamfer r34 r34 | 6 mm |
| Maximum fillet ra ra | 5 mm |
| Maximum fillet rb rb | 5 mm |
| Roller envelope diameter Ew Ew | 814 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for N30/600?
The N30/600 catalogue lists da = 626 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for N30/600?
The listed values for N30/600 are grease: 500 rpm; oil: 600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of N30/600?
The catalogue reference mass for N30/600 is 415 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.