Single-row cylindrical roller bearings
NU10/600 Cylindrical Roller Bearing Dimensions & Specifications
NU10/600 cylindrical roller bearing: 600 mm bore (d), 870 mm outside diameter (D), 118 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 600 mm |
|---|---|
| Outside diameter D | 870 mm |
| Width B | 118 mm |
| Mass | 245 kg |
| Catalogue dynamic load Cr | 2650 kN |
| Catalogue static load Cor | 5050 kN |
| Grease-lubricated speed grease | 600 rpm |
| Oil-lubricated speed oil | 700 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 844 mm |
|---|---|
| Abutment dimension db db | 626 mm |
| Minimum chamfer r12 r12 | 6 mm |
| Minimum chamfer r34 r34 | 6 mm |
| Maximum fillet ra ra | 5 mm |
| Maximum fillet rb rb | 5 mm |
| Roller envelope diameter Fw Fw | 661 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NU10/600?
The NU10/600 catalogue lists Da = 844 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NU10/600?
The listed values for NU10/600 are grease: 600 rpm; oil: 700 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NU10/600?
The catalogue reference mass for NU10/600 is 245 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.