Single-row cylindrical roller bearings
N332M Cylindrical Roller Bearing Dimensions & Specifications
N332M cylindrical roller bearing: 160 mm bore (d), 340 mm outside diameter (D), 68 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 160 mm |
|---|---|
| Outside diameter D | 340 mm |
| Width B | 68 mm |
| Mass | 30.63 kg |
| Catalogue dynamic load Cr | 705 kN |
| Catalogue static load Cor | 995 kN |
| Grease-lubricated speed grease | 1500 rpm |
| Oil-lubricated speed oil | 1800 rpm |
Mounting dimensions & additional parameters (5)
| Minimum chamfer r12 r12 | 4 mm |
|---|---|
| Minimum chamfer r34 r34 | 4 mm |
| Maximum fillet ra ra | 3 mm |
| Maximum fillet rb rb | 3 mm |
| Roller envelope diameter Ew Ew | 292 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for N332M?
The N332M catalogue lists ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for N332M?
The listed values for N332M are grease: 1500 rpm; oil: 1800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of N332M?
The catalogue reference mass for N332M is 30.63 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.