Single-row cylindrical roller bearings
NU10/710 Cylindrical Roller Bearing Dimensions & Specifications
NU10/710 cylindrical roller bearing: 710 mm bore (d), 1030 mm outside diameter (D), 140 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 710 mm |
|---|---|
| Outside diameter D | 1030 mm |
| Width B | 140 mm |
| Mass | 415 kg |
| Catalogue dynamic load Cr | 4500 kN |
| Catalogue static load Cor | 8500 kN |
| Grease-lubricated speed grease | 430 rpm |
| Oil-lubricated speed oil | 500 rpm |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da Da | 997 mm |
|---|---|
| Abutment dimension db db | 743 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Minimum chamfer r34 r34 | 7.5 mm |
| Maximum fillet ra ra | 6 mm |
| Maximum fillet rb rb | 6 mm |
| Roller envelope diameter Fw Fw | 778 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NU10/710?
The NU10/710 catalogue lists Da = 997 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for NU10/710?
The listed values for NU10/710 are grease: 430 rpm; oil: 500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of NU10/710?
The catalogue reference mass for NU10/710 is 415 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.