Deep groove ball bearings
16036M Deep Groove Ball Bearing Dimensions & Specifications
16036M deep groove ball bearing: 180 mm bore (d), 280 mm outside diameter (D), 31 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 180 mm |
|---|---|
| Outside diameter D | 280 mm |
| Width B | 31 mm |
| Mass | 7.5 kg |
| Catalogue dynamic load Cr | 145 kN |
| Catalogue static load Cor | 157 kN |
| Grease-lubricated speed grease | 2000 rpm |
| Oil-lubricated speed oil | 2600 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 271 mm |
|---|---|
| Abutment dimension da da | 189 mm |
| Minimum chamfer r12 r12 | 2.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 16036M?
The 16036M catalogue lists da = 189 mm; Da = 271 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 16036M?
The listed values for 16036M are grease: 2000 rpm; oil: 2600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 16036M?
The catalogue reference mass for 16036M is 7.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.