Deep groove ball bearings
16040M Deep Groove Ball Bearing Dimensions & Specifications
16040M deep groove ball bearing: 200 mm bore (d), 310 mm outside diameter (D), 34 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 200 mm |
|---|---|
| Outside diameter D | 310 mm |
| Width B | 34 mm |
| Mass | 10.0 kg |
| Catalogue dynamic load Cr | 168 kN |
| Catalogue static load Cor | 190 kN |
| Grease-lubricated speed grease | 1900 rpm |
| Oil-lubricated speed oil | 2400 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 294 mm |
|---|---|
| Abutment dimension da da | 218 mm |
| Minimum chamfer r12 r12 | 2.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 16040M?
The 16040M catalogue lists da = 218 mm; Da = 294 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 16040M?
The listed values for 16040M are grease: 1900 rpm; oil: 2400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 16040M?
The catalogue reference mass for 16040M is 10.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.