Deep groove ball bearings
16048MA Deep Groove Ball Bearing Dimensions & Specifications
16048MA deep groove ball bearing: 240 mm bore (d), 360 mm outside diameter (D), 37 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 240 mm |
|---|---|
| Outside diameter D | 360 mm |
| Width B | 37 mm |
| Mass | 14.5 kg |
| Catalogue dynamic load Cr | 196 kN |
| Catalogue static load Cor | 243 kN |
| Grease-lubricated speed grease | 1700 rpm |
| Oil-lubricated speed oil | 2000 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 342 mm |
|---|---|
| Abutment dimension da da | 262 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 16048MA?
The 16048MA catalogue lists da = 262 mm; Da = 342 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 16048MA?
The listed values for 16048MA are grease: 1700 rpm; oil: 2000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 16048MA?
The catalogue reference mass for 16048MA is 14.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.