Deep groove ball bearings
16072 Deep Groove Ball Bearing Dimensions & Specifications
16072 deep groove ball bearing: 360 mm bore (d), 540 mm outside diameter (D), 57 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 360 mm |
|---|---|
| Outside diameter D | 540 mm |
| Width B | 57 mm |
| Mass | 49.0 kg |
| Catalogue dynamic load Cr | 365 kN |
| Catalogue static load Cor | 585 kN |
| Grease-lubricated speed grease | 1000 rpm |
| Oil-lubricated speed oil | 1300 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 524 mm |
|---|---|
| Abutment dimension da da | 376 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 16072?
The 16072 catalogue lists da = 376 mm; Da = 524 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 16072?
The listed values for 16072 are grease: 1000 rpm; oil: 1300 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 16072?
The catalogue reference mass for 16072 is 49.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.