Deep groove ball bearings
16076 Deep Groove Ball Bearing Dimensions & Specifications
16076 deep groove ball bearing: 380 mm bore (d), 560 mm outside diameter (D), 57 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 380 mm |
|---|---|
| Outside diameter D | 560 mm |
| Width B | 57 mm |
| Mass | 51.0 kg |
| Catalogue dynamic load Cr | 375 kN |
| Catalogue static load Cor | 620 kN |
| Grease-lubricated speed grease | 950 rpm |
| Oil-lubricated speed oil | 1200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 545.4 mm |
|---|---|
| Abutment dimension da da | 394.6 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 16076?
The 16076 catalogue lists da = 394.6 mm; Da = 545.4 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 16076?
The listed values for 16076 are grease: 950 rpm; oil: 1200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 16076?
The catalogue reference mass for 16076 is 51.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.