Spherical roller bearings
23184CA/W33 Spherical Roller Bearing Dimensions & Specifications
23184CA/W33 spherical roller bearing: 420 mm bore (d), 700 mm outside diameter (D), 224 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 420 mm |
|---|---|
| Outside diameter D | 700 mm |
| Width B | 224 mm |
| Mass | 341 kg |
| Catalogue dynamic load Cr | 5000 kN |
| Catalogue static load Cor | 9400 kN |
| Grease-lubricated speed grease | 340 rpm |
| Oil-lubricated speed oil | 450 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 672 mm |
|---|---|
| Abutment dimension da da | 448 mm |
| Minimum chamfer r12 r12 | 6 mm |
| Factor Y0 Y0 | 2.2 |
| Factor Y1 Y1 | 2.2 |
| Factor Y2 Y2 | 3.3 |
| Factor e e | 0.31 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23184CA/W33?
The 23184CA/W33 catalogue lists da = 448 mm; Da = 672 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23184CA/W33?
The listed values for 23184CA/W33 are grease: 340 rpm; oil: 450 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23184CA/W33?
The catalogue reference mass for 23184CA/W33 is 341 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.