Spherical roller bearings
23192CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
23192CAF3/W33 spherical roller bearing: 460 mm bore (d), 760 mm outside diameter (D), 240 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 460 mm |
|---|---|
| Outside diameter D | 760 mm |
| Width B | 240 mm |
| Mass | 423 kg |
| Catalogue dynamic load Cr | 5700 kN |
| Catalogue static load Cor | 10900 kN |
| Grease-lubricated speed grease | 300 rpm |
| Oil-lubricated speed oil | 400 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 724 mm |
|---|---|
| Abutment dimension da da | 496 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor Y0 Y0 | 2.2 |
| Factor Y1 Y1 | 2.2 |
| Factor Y2 Y2 | 3.3 |
| Factor e e | 0.31 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23192CAF3/W33?
The 23192CAF3/W33 catalogue lists da = 496 mm; Da = 724 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23192CAF3/W33?
The listed values for 23192CAF3/W33 are grease: 300 rpm; oil: 400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23192CAF3/W33?
The catalogue reference mass for 23192CAF3/W33 is 423 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.