Spherical roller bearings
23196CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
23196CAF3/W33 spherical roller bearing: 480 mm bore (d), 790 mm outside diameter (D), 248 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 480 mm |
|---|---|
| Outside diameter D | 790 mm |
| Width B | 248 mm |
| Mass | 475 kg |
| Catalogue dynamic load Cr | 6050 kN |
| Catalogue static load Cor | 11700 kN |
| Grease-lubricated speed grease | 300 rpm |
| Oil-lubricated speed oil | 380 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 754 mm |
|---|---|
| Abutment dimension da da | 516 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor Y0 Y0 | 2.2 |
| Factor Y1 Y1 | 2.2 |
| Factor Y2 Y2 | 3.3 |
| Factor e e | 0.31 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23196CAF3/W33?
The 23196CAF3/W33 catalogue lists da = 516 mm; Da = 754 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23196CAF3/W33?
The listed values for 23196CAF3/W33 are grease: 300 rpm; oil: 380 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23196CAF3/W33?
The catalogue reference mass for 23196CAF3/W33 is 475 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.