Spherical roller bearings
24240CA/W33 Spherical Roller Bearing Dimensions & Specifications
24240CA/W33 spherical roller bearing: 200 mm bore (d), 360 mm outside diameter (D), 160 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 200 mm |
|---|---|
| Outside diameter D | 360 mm |
| Width B | 160 mm |
| Mass | 73.8 kg |
| Catalogue dynamic load Cr | 1760 kN |
| Catalogue static load Cor | 3050 kN |
| Grease-lubricated speed grease | 750 rpm |
| Oil-lubricated speed oil | 1000 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 342 mm |
|---|---|
| Abutment dimension da da | 218 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 1.4 |
| Factor Y1 Y1 | 1.4 |
| Factor Y2 Y2 | 2.1 |
| Factor e e | 0.48 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24240CA/W33?
The 24240CA/W33 catalogue lists da = 218 mm; Da = 342 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24240CA/W33?
The listed values for 24240CA/W33 are grease: 750 rpm; oil: 1000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24240CA/W33?
The catalogue reference mass for 24240CA/W33 is 73.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.