Spherical roller bearings
24244CA/W33 Spherical Roller Bearing Dimensions & Specifications
24244CA/W33 spherical roller bearing: 220 mm bore (d), 400 mm outside diameter (D), 180 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 220 mm |
|---|---|
| Outside diameter D | 400 mm |
| Width B | 180 mm |
| Mass | 103 kg |
| Catalogue dynamic load Cr | 2200 kN |
| Catalogue static load Cor | 3750 kN |
| Grease-lubricated speed grease | 650 rpm |
| Oil-lubricated speed oil | 900 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 382 mm |
|---|---|
| Abutment dimension da da | 238 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Factor Y0 Y0 | 1.4 |
| Factor Y1 Y1 | 1.4 |
| Factor Y2 Y2 | 2.1 |
| Factor e e | 0.48 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24244CA/W33?
The 24244CA/W33 catalogue lists da = 238 mm; Da = 382 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24244CA/W33?
The listed values for 24244CA/W33 are grease: 650 rpm; oil: 900 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24244CA/W33?
The catalogue reference mass for 24244CA/W33 is 103 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.