Spherical roller bearings
24252CA/W33 Spherical Roller Bearing Dimensions & Specifications
24252CA/W33 spherical roller bearing: 260 mm bore (d), 480 mm outside diameter (D), 218 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 260 mm |
|---|---|
| Outside diameter D | 480 mm |
| Width B | 218 mm |
| Mass | 182 kg |
| Catalogue dynamic load Cr | 3150 kN |
| Catalogue static load Cor | 5400 kN |
| Grease-lubricated speed grease | 530 rpm |
| Oil-lubricated speed oil | 670 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 458 mm |
|---|---|
| Abutment dimension da da | 282 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Factor Y0 Y0 | 1.3 |
| Factor Y1 Y1 | 1.4 |
| Factor Y2 Y2 | 2 |
| Factor e e | 0.49 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24252CA/W33?
The 24252CA/W33 catalogue lists da = 282 mm; Da = 458 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24252CA/W33?
The listed values for 24252CA/W33 are grease: 530 rpm; oil: 670 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24252CA/W33?
The catalogue reference mass for 24252CA/W33 is 182 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.