Metric single-row tapered roller bearings
32322 Tapered Roller Bearing Dimensions & Specifications
32322 tapered roller bearing: 110 mm bore (d), 240 mm outside diameter (D), 84.5 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 110 mm |
|---|---|
| Outside diameter D | 240 mm |
| Overall width T | 84.5 mm |
| Inner-ring width B | 80 mm |
| Outer-ring width C | 65 mm |
| Mass | 17.1 kg |
| Catalogue dynamic load Cr | 675 kN |
| Catalogue static load Cor | 910 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 213 mm |
|---|---|
| Abutment dimension Db Db | 229 mm |
| Abutment dimension da da | 144 mm |
| Abutment dimension db db | 127 mm |
| Minimum chamfer r12 r12 | 4 mm |
| Minimum chamfer r34 r34 | 3 mm |
| Factor Y Y | 1.7 |
| Factor Y0 Y0 | 0.96 |
| Factor e e | 0.35 |
| Maximum fillet ra ra | 3 mm |
| Maximum fillet rb rb | 2.5 mm |
| Load centre dimension a a | 58.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 32322?
For 32322, the complete bearing width T is 84.5 mm; the inner-ring width B is 80 mm. The outer-ring width C is 65 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 32322?
The 32322 catalogue lists da = 144 mm; Da = 213 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 32322?
The catalogue reference mass for 32322 is 17.1 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.