Metric single-row tapered roller bearings
32332 Tapered Roller Bearing Dimensions & Specifications
32332 tapered roller bearing: 160 mm bore (d), 340 mm outside diameter (D), 121 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 160 mm |
|---|---|
| Outside diameter D | 340 mm |
| Overall width T | 121 mm |
| Inner-ring width B | 114 mm |
| Outer-ring width C | 95 mm |
| Mass | 48.3 kg |
| Catalogue dynamic load Cr | 1210 kN |
| Catalogue static load Cor | 1770 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 301 mm |
|---|---|
| Abutment dimension Db Db | 327 mm |
| Abutment dimension da da | 210 mm |
| Abutment dimension db db | 183 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Minimum chamfer r34 r34 | 4 mm |
| Factor Y Y | 1.6 |
| Factor Y0 Y0 | 0.88 |
| Factor e e | 0.37 |
| Maximum fillet ra ra | 4 mm |
| Maximum fillet rb rb | 3 mm |
| Load centre dimension a a | 87.1 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 32332?
For 32332, the complete bearing width T is 121 mm; the inner-ring width B is 114 mm. The outer-ring width C is 95 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 32332?
The 32332 catalogue lists da = 210 mm; Da = 301 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 32332?
The catalogue reference mass for 32332 is 48.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.