Metric single-row tapered roller bearings
32334 Tapered Roller Bearing Dimensions & Specifications
32334 tapered roller bearing: 170 mm bore (d), 360 mm outside diameter (D), 127 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 170 mm |
|---|---|
| Outside diameter D | 360 mm |
| Overall width T | 127 mm |
| Inner-ring width B | 120 mm |
| Outer-ring width C | 100 mm |
| Mass | 57 kg |
| Catalogue dynamic load Cr | 1370 kN |
| Catalogue static load Cor | 2050 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 319 mm |
|---|---|
| Abutment dimension Db Db | 346 mm |
| Abutment dimension da da | 222 mm |
| Abutment dimension db db | 194 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Minimum chamfer r34 r34 | 4 mm |
| Factor Y Y | 1.6 |
| Factor Y0 Y0 | 0.88 |
| Factor e e | 0.37 |
| Maximum fillet ra ra | 4 mm |
| Maximum fillet rb rb | 3 mm |
| Load centre dimension a a | 91.3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 32334?
For 32334, the complete bearing width T is 127 mm; the inner-ring width B is 120 mm. The outer-ring width C is 100 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 32334?
The 32334 catalogue lists da = 222 mm; Da = 319 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 32334?
The catalogue reference mass for 32334 is 57 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.