Metric single-row tapered roller bearings
32336 Tapered Roller Bearing Dimensions & Specifications
32336 tapered roller bearing: 180 mm bore (d), 380 mm outside diameter (D), 134 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 180 mm |
|---|---|
| Outside diameter D | 380 mm |
| Overall width T | 134 mm |
| Inner-ring width B | 126 mm |
| Outer-ring width C | 106 mm |
| Mass | 66.8 kg |
| Catalogue dynamic load Cr | 1520 kN |
| Catalogue static load Cor | 2290 kN |
Mounting dimensions & additional parameters (12)
| Abutment dimension Da Da | 336 mm |
|---|---|
| Abutment dimension Db Db | 364 mm |
| Abutment dimension da da | 232 mm |
| Abutment dimension db db | 205 mm |
| Minimum chamfer r12 r12 | 5 mm |
| Minimum chamfer r34 r34 | 4 mm |
| Factor Y Y | 1.6 |
| Factor Y0 Y0 | 0.88 |
| Factor e e | 0.37 |
| Maximum fillet ra ra | 4 mm |
| Maximum fillet rb rb | 3 mm |
| Load centre dimension a a | 96.6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which width should I use when checking 32336?
For 32336, the complete bearing width T is 134 mm; the inner-ring width B is 126 mm. The outer-ring width C is 106 mm. Check T against the assembly drawing; the separate ring widths describe different parts.
Which mounting dimensions are listed for 32336?
The 32336 catalogue lists da = 232 mm; Da = 336 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 32336?
The catalogue reference mass for 32336 is 66.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.