Deep groove ball bearings
6044M Deep Groove Ball Bearing Dimensions & Specifications
6044M deep groove ball bearing: 220 mm bore (d), 340 mm outside diameter (D), 56 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 220 mm |
|---|---|
| Outside diameter D | 340 mm |
| Width B | 56 mm |
| Mass | 18.8 kg |
| Catalogue dynamic load Cr | 245 kN |
| Catalogue static load Cor | 293 kN |
| Grease-lubricated speed grease | 1800 rpm |
| Oil-lubricated speed oil | 2200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 320 mm |
|---|---|
| Abutment dimension da da | 243 mm |
| Minimum chamfer r12 r12 | 3.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6044M?
The 6044M catalogue lists da = 243 mm; Da = 320 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6044M?
The listed values for 6044M are grease: 1800 rpm; oil: 2200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6044M?
The catalogue reference mass for 6044M is 18.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.