Deep groove ball bearings
6040X1M Deep Groove Ball Bearing Dimensions & Specifications
6040X1M deep groove ball bearing: 200 mm bore (d), 309.5 mm outside diameter (D), 51 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 200 mm |
|---|---|
| Outside diameter D | 309.5 mm |
| Width B | 51 mm |
| Mass | 14.3 kg |
| Catalogue dynamic load Cr | 216 kN |
| Catalogue static load Cor | 245 kN |
| Grease-lubricated speed grease | 1900 rpm |
| Oil-lubricated speed oil | 2400 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 293 mm |
|---|---|
| Abutment dimension da da | 220 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6040X1M?
The 6040X1M catalogue lists da = 220 mm; Da = 293 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6040X1M?
The listed values for 6040X1M are grease: 1900 rpm; oil: 2400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6040X1M?
The catalogue reference mass for 6040X1M is 14.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.