Deep groove ball bearings
6048M Deep Groove Ball Bearing Dimensions & Specifications
6048M deep groove ball bearing: 240 mm bore (d), 360 mm outside diameter (D), 56 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 240 mm |
|---|---|
| Outside diameter D | 360 mm |
| Width B | 56 mm |
| Mass | 20.7 kg |
| Catalogue dynamic load Cr | 244 kN |
| Catalogue static load Cor | 296 kN |
| Grease-lubricated speed grease | 1700 rpm |
| Oil-lubricated speed oil | 2000 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 340 mm |
|---|---|
| Abutment dimension da da | 264 mm |
| Minimum chamfer r12 r12 | 3.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6048M?
The 6048M catalogue lists da = 264 mm; Da = 340 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6048M?
The listed values for 6048M are grease: 1700 rpm; oil: 2000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6048M?
The catalogue reference mass for 6048M is 20.7 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.