Deep groove ball bearings
6088F1 Deep Groove Ball Bearing Dimensions & Specifications
6088F1 deep groove ball bearing: 440 mm bore (d), 650 mm outside diameter (D), 94 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 440 mm |
|---|---|
| Outside diameter D | 650 mm |
| Width B | 94 mm |
| Mass | 105 kg |
| Catalogue dynamic load Cr | 550 kN |
| Catalogue static load Cor | 965 kN |
| Grease-lubricated speed grease | 850 rpm |
| Oil-lubricated speed oil | 1000 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 611 mm |
|---|---|
| Abutment dimension da da | 485 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6088F1?
The 6088F1 catalogue lists da = 485 mm; Da = 611 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6088F1?
The listed values for 6088F1 are grease: 850 rpm; oil: 1000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6088F1?
The catalogue reference mass for 6088F1 is 105 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.