Deep groove ball bearings
6092F1 Deep Groove Ball Bearing Dimensions & Specifications
6092F1 deep groove ball bearing: 460 mm bore (d), 680 mm outside diameter (D), 100 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 460 mm |
|---|---|
| Outside diameter D | 680 mm |
| Width B | 100 mm |
| Mass | 120 kg |
| Catalogue dynamic load Cr | 605 kN |
| Catalogue static load Cor | 1080 kN |
| Grease-lubricated speed grease | 800 rpm |
| Oil-lubricated speed oil | 950 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 640 mm |
|---|---|
| Abutment dimension da da | 506 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6092F1?
The 6092F1 catalogue lists da = 506 mm; Da = 640 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6092F1?
The listed values for 6092F1 are grease: 800 rpm; oil: 950 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6092F1?
The catalogue reference mass for 6092F1 is 120 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.