Deep groove ball bearings
6080 Deep Groove Ball Bearing Dimensions & Specifications
6080 deep groove ball bearing: 400 mm bore (d), 600 mm outside diameter (D), 90 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 400 mm |
|---|---|
| Outside diameter D | 600 mm |
| Width B | 90 mm |
| Mass | 90.5 kg |
| Catalogue dynamic load Cr | 510 kN |
| Catalogue static load Cor | 825 kN |
| Grease-lubricated speed grease | 900 rpm |
| Oil-lubricated speed oil | 1100 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 568 mm |
|---|---|
| Abutment dimension da da | 437 mm |
| Minimum chamfer r12 r12 | 5.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6080?
The 6080 catalogue lists da = 437 mm; Da = 568 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6080?
The listed values for 6080 are grease: 900 rpm; oil: 1100 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6080?
The catalogue reference mass for 6080 is 90.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.