Deep groove ball bearings
6096F1 Deep Groove Ball Bearing Dimensions & Specifications
6096F1 deep groove ball bearing: 480 mm bore (d), 700 mm outside diameter (D), 100 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 480 mm |
|---|---|
| Outside diameter D | 700 mm |
| Width B | 100 mm |
| Mass | 125 kg |
| Catalogue dynamic load Cr | 605 kN |
| Catalogue static load Cor | 1090 kN |
| Grease-lubricated speed grease | 750 rpm |
| Oil-lubricated speed oil | 900 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 660 mm |
|---|---|
| Abutment dimension da da | 527 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6096F1?
The 6096F1 catalogue lists da = 527 mm; Da = 660 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6096F1?
The listed values for 6096F1 are grease: 750 rpm; oil: 900 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6096F1?
The catalogue reference mass for 6096F1 is 125 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.