Deep groove ball bearings
60/500F1 Deep Groove Ball Bearing Dimensions & Specifications
60/500F1 deep groove ball bearing: 500 mm bore (d), 720 mm outside diameter (D), 100 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 500 mm |
|---|---|
| Outside diameter D | 720 mm |
| Width B | 100 mm |
| Mass | 131 kg |
| Catalogue dynamic load Cr | 630 kN |
| Catalogue static load Cor | 1170 kN |
| Grease-lubricated speed grease | 750 rpm |
| Oil-lubricated speed oil | 900 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 680 mm |
|---|---|
| Abutment dimension da da | 548 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/500F1?
The 60/500F1 catalogue lists da = 548 mm; Da = 680 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/500F1?
The listed values for 60/500F1 are grease: 750 rpm; oil: 900 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/500F1?
The catalogue reference mass for 60/500F1 is 131 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.