Deep groove ball bearings
619/630F1 Deep Groove Ball Bearing Dimensions & Specifications
619/630F1 deep groove ball bearing: 630 mm bore (d), 850 mm outside diameter (D), 100 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 630 mm |
|---|---|
| Outside diameter D | 850 mm |
| Width B | 100 mm |
| Mass | 163 kg |
| Catalogue dynamic load Cr | 625 kN |
| Catalogue static load Cor | 1350 kN |
| Grease-lubricated speed grease | 600 rpm |
| Oil-lubricated speed oil | 700 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 807 mm |
|---|---|
| Abutment dimension da da | 683 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/630F1?
The 619/630F1 catalogue lists da = 683 mm; Da = 807 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/630F1?
The listed values for 619/630F1 are grease: 600 rpm; oil: 700 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/630F1?
The catalogue reference mass for 619/630F1 is 163 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.