Deep groove ball bearings
6222M Deep Groove Ball Bearing Dimensions & Specifications
6222M deep groove ball bearing: 110 mm bore (d), 200 mm outside diameter (D), 38 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 110 mm |
|---|---|
| Outside diameter D | 200 mm |
| Width B | 38 mm |
| Mass | 5.45 kg |
| Catalogue dynamic load Cr | 144 kN |
| Catalogue static load Cor | 117 kN |
| Grease-lubricated speed grease | 3000 rpm |
| Oil-lubricated speed oil | 3600 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 189 mm |
|---|---|
| Abutment dimension da da | 121 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor f0 f0 | 14 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6222M?
The 6222M catalogue lists da = 121 mm; Da = 189 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6222M?
The listed values for 6222M are grease: 3000 rpm; oil: 3600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6222M?
The catalogue reference mass for 6222M is 5.45 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.