Deep groove ball bearings
6226M Deep Groove Ball Bearing Dimensions & Specifications
6226M deep groove ball bearing: 130 mm bore (d), 230 mm outside diameter (D), 40 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 130 mm |
|---|---|
| Outside diameter D | 230 mm |
| Width B | 40 mm |
| Mass | 7.62 kg |
| Catalogue dynamic load Cr | 167 kN |
| Catalogue static load Cor | 146 kN |
| Grease-lubricated speed grease | 2600 rpm |
| Oil-lubricated speed oil | 3200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 217 mm |
|---|---|
| Abutment dimension da da | 143 mm |
| Minimum chamfer r12 r12 | 3.0 mm |
| Factor f0 f0 | 15 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6226M?
The 6226M catalogue lists da = 143 mm; Da = 217 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6226M?
The listed values for 6226M are grease: 2600 rpm; oil: 3200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6226M?
The catalogue reference mass for 6226M is 7.62 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.