Deep groove ball bearings
6224M Deep Groove Ball Bearing Dimensions & Specifications
6224M deep groove ball bearing: 120 mm bore (d), 215 mm outside diameter (D), 40 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 120 mm |
|---|---|
| Outside diameter D | 215 mm |
| Width B | 40 mm |
| Mass | 6.33 kg |
| Catalogue dynamic load Cr | 145 kN |
| Catalogue static load Cor | 118 kN |
| Grease-lubricated speed grease | 2800 rpm |
| Oil-lubricated speed oil | 3400 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 204 mm |
|---|---|
| Abutment dimension da da | 131 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor f0 f0 | 14 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6224M?
The 6224M catalogue lists da = 131 mm; Da = 204 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6224M?
The listed values for 6224M are grease: 2800 rpm; oil: 3400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6224M?
The catalogue reference mass for 6224M is 6.33 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.