Deep groove ball bearings
6332M Deep Groove Ball Bearing Dimensions & Specifications
6332M deep groove ball bearing: 160 mm bore (d), 340 mm outside diameter (D), 68 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 160 mm |
|---|---|
| Outside diameter D | 340 mm |
| Width B | 68 mm |
| Mass | 31.9 kg |
| Catalogue dynamic load Cr | 300 kN |
| Catalogue static load Cor | 323 kN |
| Grease-lubricated speed grease | 1800 rpm |
| Oil-lubricated speed oil | 2200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 324 mm |
|---|---|
| Abutment dimension da da | 176 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 14 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6332M?
The 6332M catalogue lists da = 176 mm; Da = 324 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6332M?
The listed values for 6332M are grease: 1800 rpm; oil: 2200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6332M?
The catalogue reference mass for 6332M is 31.9 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.