Deep groove ball bearings
6336M Deep Groove Ball Bearing Dimensions & Specifications
6336M deep groove ball bearing: 180 mm bore (d), 380 mm outside diameter (D), 75 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 180 mm |
|---|---|
| Outside diameter D | 380 mm |
| Width B | 75 mm |
| Mass | 43.1 kg |
| Catalogue dynamic load Cr | 355 kN |
| Catalogue static load Cor | 405 kN |
| Grease-lubricated speed grease | 1700 rpm |
| Oil-lubricated speed oil | 2000 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 356 mm |
|---|---|
| Abutment dimension da da | 204 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 14 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6336M?
The 6336M catalogue lists da = 204 mm; Da = 356 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6336M?
The listed values for 6336M are grease: 1700 rpm; oil: 2000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6336M?
The catalogue reference mass for 6336M is 43.1 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.