Product Overview
Use this 24156 CA/W33 product reference to review dimensions, the complete designation and ordering requirements. Check the proposed bearing against the equipment drawing, loads, speed and operating conditions before approving a replacement. Application examples below are starting points for review, rather than confirmation of suitability for every machine.
Design & Engineering Advantages
The CA designation refers to a machined brass cage; W33 identifies the outer-ring lubrication groove and holes. Confirm the supplied design, bore form and clearance against the applicable drawing. Lubricant selection and maintenance depend on the application.
Confirm material, heat treatment and inspection requirements in the supply documentation. Performance depends on the design, manufacturing quality, mounting and operating conditions.
Key Features
- Material and inspection requirements to be confirmed in the supply documentation.
- CA machined brass cage; assess suitability for the actual operating conditions.
- 241-series dimensions to be checked against the available installation space.
- W33 outer-ring lubrication feature for lubricant supply.
- Clearance and permissible misalignment require separate checks.
Boundary Dimensions
| Designation | 24156 CA/W33 |
| Bore diameter (d) | 280 mm |
| Outside diameter (D) | 460 mm |
| Width (B) | 180 mm |
Procurement Selection
When sourcing 24156 CA/W33, review purchase cost together with downtime risk, inspection documentation and maintenance needs. Verify d/D/B, complete suffixes, cage, clearance, tolerance class and application requirements. Use load ratings and speed data applicable to the actual supplied design; another brand or execution does not establish equivalent performance.
Cross-reference & Replacement
| ZQM Model | Reference Brand | Reference Model | Equivalence Basis |
|---|---|---|---|
| 24156 CA/W33 | SKF | 24156 CC/W33 | Dimensional conformity |
| 24156 CA/W33 | FAG | 24156-E1-M (tapered K30 = 24156-E1-K30-M) | ISO nominal boundary reference |
| 24156 CA/W33 | NSK | 24156CAME4 (tapered K30 = 24156CAMK30E4) | ISO nominal boundary reference |
The references above are a starting point for review, not approval of direct interchangeability. Compare complete designations and drawings, including bore form, cage, clearance, ratings and operating conditions. Confirm shaft and housing abutments, fillet radii, fits and axial location against approved product and equipment drawings before machining or mounting.
Typical Industrial Applications
- Paper Mill Drying and Press Cylinders
- Heavy-duty Industrial Gearboxes
- Steel Rolling Mill Drives and Stand Supports
- Large Conveyor Head and Tail Pulleys
- Vertical Raw Mills in Cement Production
Service Life & Reliability
Assess basic rating life using the applicable dynamic load rating, equivalent dynamic load and speed. L10 is a statistical rating-life measure, not a guaranteed life for an individual bearing. Lubrication, contamination, load spectrum and installation affect service life. Check static loading separately using the applicable static load rating and equivalent static load.
Installation & Lubrication Notes
Before mounting, verify shaft and housing fits, shoulders, fillets, axial location and remaining clearance. Avoid transmitting mounting force through the rolling elements. Follow the relevant design instructions for permissible misalignment and heating temperature. Select lubricant, quantity and maintenance intervals for the load, speed, temperature and contamination. Catalogue speed ratings are not relubrication intervals or a direct safe operating limit for the assembled machine.
Frequently Asked Questions
How does material purity influence the fatigue resistance of 24156 CA/W33?
Non-metallic inclusions can contribute to rolling-contact fatigue. Material purity is one factor alongside heat treatment, raceway quality, loading, lubrication, contamination and mounting. Confirm material and inspection requirements in the supply documentation; a material name alone does not guarantee service life.
How should a CA brass cage be assessed for a gearbox application?
Review speed, acceleration, vibration, temperature, lubricant and material compatibility. CA and CC designs differ in cage construction and guidance; one material is not universally better under every impact or high-speed condition. Confirm the complete designation and actual design.
What do the Y0, Y1 and Y2 calculation factors describe?
Y0 is used in the applicable equivalent static load calculation; Y1 and Y2 apply to equivalent dynamic load calculations under the stated conditions. Use factors and formulas for the actual supplied design. They are not measures of bearing efficiency or guarantees of interchangeability.
How should 24156 CA/W33 be checked against the available installation space?
Compare bore, outside diameter and width with the equipment drawing, then check applicable load ratings and operating requirements. Width or self-aligning geometry alone does not establish suitability or longer service life.
Which installation abutment dimensions should be checked?
Verify shaft abutment da, housing abutment Da and fillet radius ra against approved product and equipment drawings. Check adequate ring support without fillet interference, together with fits, axial location and remaining clearance.
Related Bearing Models
- 24152 CA/W33
- 24160 CA/W33
- 24056 CA/W33
- 23156 CA/W33
- 23256 CA/W33
Technical Support & Global Inquiry
Send ZQM Bearings the full 24156 CA/W33 designation, quantity, destination, drawings and inspection requirements. Confirm material, cage, clearance, packaging, corrosion protection and delivery terms in the quotation. For repeat orders, agree documentation and consistency requirements; availability, lead time and service arrangements are confirmed by enquiry.
24156CA/W33 Sourcing: China Supply and Flexible Orders
ZQM Bearings supports overseas distributors, importers, machinery manufacturers and industrial end users. Discuss small quantities, mixed-model purchase lists and wholesale or bulk-order requirements. Our manufacturing resources in Wafangdian, export coordination in Ningbo and Shanghai warehousing support order planning; actual availability, MOQ and lead time are confirmed by enquiry.
Brand Alternatives and OEM Review
For an alternative or replacement requirement, send the complete original brand designation, suffixes and drawing. Matching dimensions alone do not confirm interchangeability. Cage, clearance, precision, internal design and operating conditions require review. OEM and custom-bearing requests are assessed against the supplied technical requirements.
24156CA/W33 Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 280 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 460 mm |
| Boundary Dimensions & Weight | Width (B) | 180 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 115 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 2640 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 5000 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 560 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 750 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 302 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 438 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 5 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 4 mm |
| Calculation Factors | Calculation factor (e) | 0.37 |
| Calculation Factors | Axial load factor (static) (Y0) | 1.8 |
| Calculation Factors | Axial load factor (Y1) | 1.8 |
| Calculation Factors | Axial load factor (Y2) | 2.7 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Frequently Asked Questions — 24156 CA/W33
What tapered bore ratio applies if 24156 CA/W33 is ordered with a tapered bore?
Standard 24156 CA/W33 (280 × 460 × 180 mm) has a cylindrical bore. Because it belongs to the wide 240/241 ISO series, tapered-bore executions strictly use a 1:30 taper (suffix K30, paired with AH240/AH241 withdrawal sleeves)—never a 1:12 H-series sleeve.
How does the W33 lubrication feature support heavy continuous operation on 24156 CA/W33?
The W33 outer-ring annular groove and oil holes allow centralized grease or circulating oil delivery directly between the two roller rows in continuous casters, pulverizers, and heavy gearboxes.
Which internal clearance group (CN, C3, C4) fits 24156 CA/W33 best?
Heavy interference fits and elevated operating temperatures typically require C3 or C4 radial internal clearance. Verify residual clearance across both roller rows with feeler gauges during assembly.
How can I verify cross-brand compatibility and request pricing for 24156 CA/W33?
Cross-brand designations reflect ISO nominal boundary correspondence only. Submit your full suffix, bore type (cylindrical vs K30), clearance, quantity, and destination port via our Contact page.






